4 Core 240mm2 Aluminium Cable: Price and RFQ Requirements

Nov. 13, 2026

Multicore aluminium conductor cable samples

Project procurement guide.

The price of 4 core 240mm2 aluminium cable depends on much more than the nominal aluminium area. Confirm voltage, conductor class and shape, insulation, armour, sheath, standard, metres and drum plan. Ask the supplier to confirm the exact construction is available before using its price in a project budget.

4 core 240mm2 aluminium cable price

The 4 core 240mm2 aluminium cable price depends on the complete offered construction, quantity and commercial scope. Specify the required aluminium conductor class, insulation, armour and sheath before requesting bids.

Compare the 4 core 240mm2 aluminium cable price only after the engineering team has approved the cable size and termination arrangement. A nominal cross-section alone cannot establish ampacity or voltage-drop suitability.

Ask for the 4 core 240mm2 aluminium cable price to be separated from optional freight, accessories or inspection services where applicable. State the same delivery point and drum plan to every bidder.

A current 4 core 240mm2 aluminium cable price should be a dated written offer linked to the approved specification. Send metres per item, destination and required documents to obtain a comparable response.

Describe the LV cable without leaving substitutions open

For an equal-core design, 4x240 mm² means four conductors of 240 mm² nominal area. It does not mean a three-phase cable with an automatically reduced neutral. If the project calls for unequal core sizes, list each one in the schedule and identify the intended functions.

RFQ item	What to write
Material	Aluminium, with specified conductor class and shape
Voltage / insulation	Required U0/U and XLPE or specified insulation
Armour	STA, SWA or unarmoured; do not use an ambiguous abbreviation
Sheath	Material and additional exposure requirements
Connections	Approved terminals, compatible lugs and equipment constraints
Quantity	Total metres, individual run lengths and permitted drum plan
Commercial scope	Destination, delivery point, inspection and quotation validity

AL XLPE STA PVC cable supplier

An AL XLPE STA PVC cable supplier should confirm the aluminium conductor, XLPE insulation, steel tape armour and PVC sheath in the offered drawing. Add voltage, conductor class and core sizes to make the enquiry complete.

Ask the AL XLPE STA PVC cable supplier to provide product-specific dimensions and electrical data. Have the project team review the conductor and termination arrangement before accepting the proposal.

When comparing an AL XLPE STA PVC cable supplier with a copper or wire-armoured alternative, keep the constructions on separate quotation lines. A common nominal size does not establish the same project performance.

Your RFQ to an AL XLPE STA PVC cable supplier should state metres, drum lengths, standard and destination. Ask for written availability, pricing validity and the documentation expected with the order.

Review terminations with the electrical design

Aluminium and copper options should be compared as complete installed solutions. Connector compatibility, installation procedure and equipment space need review alongside the electrical calculation. BASEC’s aluminium conductor guidance highlights the importance of appropriate connections and installation considerations.

Request the proposed conductor geometry and cable dimensions early. Confirm that the selected accessories and switchgear can accept them. Avoid deciding on aluminium solely from a lower cable price if connection or installation changes have not been included in the cost review.

Separate price assumptions from firm supply terms

Ask for a dated quotation tied to the schedule revision. It should explain the quantity basis, available lengths, minimum production quantity, packing, tests, lead time and delivery scope. Clarify whether freight and destination charges are included instead of assuming that every per-metre price is a delivered price.

If a supplier offers AL/XLPE/STA/PVC, check that the drawing actually shows aluminium conductors, XLPE insulation, steel tape armour and PVC outer sheath. The shorthand does not state every dimension, material grade or test requirement.

Buyer questions

Can I use the same current rating as a 240mm² copper cable?

No. Use data and calculations for the actual aluminium construction and installation.

Is four-core aluminium always lighter to install?

Check the offered cable’s total mass and drum plan, including insulation, armour and sheath; do not estimate handling requirements from the conductor alone.

Can Honglin quote this size?

Send the complete schedule for a construction and manufacturing feasibility check. The written response should confirm availability, documents and commercial terms.

Prepare your LV cable enquiry

Keep the LV cable enquiry linked to the approved specification revision. Ask for the proposed LV cable datasheet before comparing commercial offers.

Browse the 0.6/1kV low voltage power cable range and send Honglin Cable your project enquiry. Include the approved LV cable schedule, standard, conductor, core sizes, construction, total metres and destination. Ask for a specification-specific datasheet and a written quotation confirming available construction, minimum quantity, production lead time and delivery scope.